Bronkhorst FLOW-BUS LabVIEW Driver User Manual download pdf (Page 14)

FLOW-BUS LabVIEW™ Driver Manual 9.17.078

Bronkhorst®

When everything is connected the VI can be used just like any other driver VI. The block diagram of the completed VI is shown

below.

Figure 10: Example VI

If you compare the image above to the image in chapter 3.2.2 or any other driver VI, you will see a lot of similarities. The only

differences are the entered values, and possibly the conversion of the data to write to the instrument. Therefore the easiest way to

make a new driver VI is to copy an existing one and change the necessary controls, indicators and values.

1 2 ... 9 10 11 12 13 14 15

No comments

Bronkhorst FLOW-BUS LabVIEW Driver User Manual Page 14